Only released in EOL distros:
Package Summary
This application allows the PR2 to navigate autonomously in an odometric frame.
- Author: Eitan Marder-Eppstein
- License: BSD
- Repository: wg-ros-pkg
- Source: svn https://code.ros.org/svn/wg-ros-pkg/stacks/pr2_navigation_apps/tags/pr2_navigation_apps-0.1.1
Package Summary
This application allows the PR2 to navigate autonomously in an odometric frame.
- Author: Eitan Marder-Eppstein
- License: BSD
- Source: svn https://code.ros.org/svn/wg-ros-pkg/stacks/pr2_navigation_apps/trunk
Package Summary
This application allows the PR2 to navigate autonomously in an odometric frame.
- Author: Eitan Marder-Eppstein
- License: BSD
- Source: svn https://code.ros.org/svn/wg-ros-pkg/stacks/pr2_navigation_apps/trunk
Package Summary
This application allows the PR2 to navigate autonomously in an odometric frame.
- Author: Eitan Marder-Eppstein
- License: BSD
- Source: svn https://code.ros.org/svn/wg-ros-pkg/stacks/pr2_navigation_apps/trunk
Package Summary
This application allows the PR2 to navigate autonomously in an odometric frame.
- Maintainer status: maintained
- Maintainer: Devon Ash <dash AT clearpathrobotics DOT com>
- Author: Eitan Marder-Eppstein
- License: BSD
- Source: git https://github.com/PR2/pr2_navigation_apps.git (branch: hydro-devel)
Package Summary
This application allows the PR2 to navigate autonomously in an odometric frame.
- Maintainer status: maintained
- Maintainer: David Feil-Seifer <dave AT cse.unr DOT edu>
- Author: Eitan Marder-Eppstein
- License: BSD
- Source: git https://github.com/PR2/pr2_navigation_apps.git (branch: hydro-devel)
Package Summary
This application allows the PR2 to navigate autonomously in an odometric frame.
- Maintainer: David Feil-Seifer <dave AT cse.unr DOT edu>
- Author: Eitan Marder-Eppstein
- License: BSD
- Source: git https://github.com/PR2/pr2_navigation_apps.git (branch: hydro-devel)
Contents
Overview
This package provides an application that allows a PR2 robot to navigate autonomously in an odometric frame without any pre-specified map.
Prerequisites
The pr2_2dnav_local application requires some prerequisite steps in order to run.
Bring up the Robot
As with all PR2 applications, you must bring up your robot.
Tuck the Arms
Tuck the arms of the PR2 using the pr2_tuckarm application.
Running the Application
The pr2_2dnav_local application can be run with the following command:
roslaunch pr2_2dnav_local pr2_2dnav.launch
Interacting with the Application
The navigation stack that is the heart of the pr2_2dnav_local application can be commanded via rviz, nav_view, or through code.
rviz
- You can bring up rviz in a pr2_2dnav_local friendly configuration by running the following launch file:
roslaunch pr2_navigation_local rviz_move_base_local.launch
- The application is now up and ready to receive goals.
- Click the "2D Nav Goal" button in the rviz GUI window.
- Left click on the map at the location of the goal and drag to set orientation.
- If the robot is surrounded by obstacles, it may not move. Move obstacles or set a new goal to try again.
- The application is now up and ready to receive goals.
Navigation and rviz tutorial: Provides additional information on using rviz with the navigation stack.
nav_view
- You can bring up nav_view in a pr2_2dnav friendly configuration by running the following launch file
roslaunch pr2_navigation_local nav_view_move_base_local.launch
- The application is now up and ready to receive goals.
- Click the "Set Goal" button in the nav_view GUI window.
- Left click on the map at the location of the goal and drag to set orientation.
- If the robot is surrounded by obstacles, it may not move. Move obstacles or set a new goal to try again.
- The application is now up and ready to receive goals.
Through Code
A tutorial on sending goals to the navigation stack with code can be found here.
